Water proofing membrane laying

Uncategorized Rajan Patel - November 22, 2011 0

Application of Polyprime.

Block Work Quality

Uncategorized Rajan Patel - November 22, 2011 0

As a QC Engineer during site visit I do observed these kind of non-conformance many time the root cause analysis is...

Block Work

Uncategorized Rajan Patel - November 20, 2011 0

As a QC engineer during the site visit following Non-Conformance observed in block work and issued to the site team now...

Prior to Backfilling

Uncategorized Rajan Patel - November 17, 2011 0

Back-filling around the structure is going to start, as a QC Engineer I will send the following comments to site...

Surface Preparation

Uncategorized Rajan Patel - November 17, 2011 0

Why site engineer's don't include surface preparation in their activity?Preparation for Light weight concrete work is going on in checklist...

Muscat Rain

Uncategorized Rajan Patel - November 3, 2011 0

Heavy rain in muscat..never seen muscat like this....its terrific ...

How important is Surface Preparation before concrete footing.

Uncategorized Rajan Patel - October 25, 2011 0

Non-Conformance in work due to Proper compaction not done for Footing PCC.Footing and ground structure are designed for ground with an...

Dome form work

Uncategorized Rajan Patel - October 11, 2011 0

Dome form-work for lobby room, the construction of the centering for domes is more complicated than that of most other types...

Installation of Electrical conduits in Suspended Slabs

Uncategorized Rajan Patel - October 6, 2011 0

During the inspection, it was observed electrical conduits are installed directly above the form-work ply and not between the two layers...

House Keeping

Uncategorized Rajan Patel - October 5, 2011 0

Bad PracticeGood Practice

Reinforcement Inspection at Swimming Pool (The QC View)

Uncategorized Rajan Patel - September 28, 2011 0

As a QC Engineer this is what i do almost every day "Reinforcement Inspection" 75% of my inspection either small structure...

Whome Shoud I Approch For Quality At Workplace.

Uncategorized Rajan Patel - September 27, 2011 0

As a QC Engineer, I have to be proactive all the time, I remember one of my senior told me to...

Striking of form work

Uncategorized Rajan Patel - September 27, 2011 0

The disadvantage of Early striking and delay in striking.It can cause...Frost damage,Mechanical damage,Moisture loss affecting heat of hydration,Color variation,DeflectionThermal crack.

Finding Non-Conformance in Building Drainage & Sanitation Work

Uncategorized Rajan Patel - August 25, 2011 0

Building drainage and sanitation work is in progress but the work is not according to customer specification in some places....

At Tajin GrillHouse, Radisson blu, Muscat

Uncategorized Rajan Patel - July 11, 2011 0

Me and my wife went for a dinner to Al Tajin Grill House at Radisson blu, Al Khuwair, Muscatthey are having 6...